Plate heat exchanger 110 plates 3700kW with 2" external connection Ba-115-110

Plate heat exchanger

Maximum output of heat exchanger: 3700kW
Nominal output: 500-880kW
Number of discs: 110
Connection: 2" external thread
Nominal flow: 45 m³/h
Heat exchange surface: 12.65 m²
Operating pressure: 30 bar
Test pressure: 45-60 bar
Min. temperature: -190°C
Max. temperature: +225°C
Weight: 66 kg
Plate material: stainless steel 304 and 316
Plate thickness: 0.4 mm
Solder material: 99.9% Cu

DIMENSIONS:

Length (A): 535 mm
Width (B): 253 mm< /span>
Depth (F): 279 mm
Distance (C) : 456 mm
Distance (D): 174 mm

Operation tips:
⋅It is recommended to install the heat exchanger vertically
⋅The sides must be connected in countercurrent
⋅Periodic cleaning must be carried out on a heat exchanger

Plate heat exchanger

Please check your availability before ordering!< /span>

The 110-plate heat exchanger, model Ba-115-110, was the largest plate heat exchanger with a surface area of ​​12.65 square meters until recently. However, the manufacturer now also offers larger models with 110 plates and a larger heat exchange surface in this series.

The Ba-115-110 heat exchanger is connected in counterflow mode.
When the device whether connected for heating or cooling, it is important to remember that this is a classic counter-flow heat exchanger. This means that, regardless of which channel is chosen for the power connection and which for the other side, the fluids flowing through the heat exchanger must flow countercurrently, i.e. in opposite directions. Forgetting or neglecting the principle of counterflow is one of the most common connection errors, which manifests itself in heat exchangers not being able to achieve efficient performance. According to our estimates, a heat exchanger connected in so-called co-flow (the opposite of counter-flow, i.e. both fluids flow in the same direction) loses about 30-40% of the heat transfer efficiency. Unless, of course, it is a special exchanger adapted to co-current connections, which has a specially designed channel arrangement.

Features:

- 316L stainless steel, soldered with 99.9% Cu copper

- Heating power 500-880 kW depending on the flow temperature

- Connections 4x 2" (50)

- Operating pressure up to 30 bar

- Test pressure 45-60 bar

- Maximum operating temperature up to +230°C

- Flow rate 45 m³/h