Plate heat exchanger 70 plates 526 mm long 770kW 4x1 1/2" with external connection

Plate heat exchanger

Maximum output of heat exchanger: 770 kW
Nominal output 140-270 kW
Number of discs: 70
Connection: 4x1½" external thread
Nominal flow: 22 m³/h
Heat exchange surface: 4.20 m²
Operating pressure: 30 bar
Test pressure: 45-60 bar
Min. temperature: -190°C
Max. temperature: +225°C
Weight: 20 kg
Plate material: stainless steel 304 or 316
Plate thickness: 0.4 mm
Solder material: 99.9% Cu

DIMENSIONS:

Length (A): 526 mm
Width (B): 124 mm< /span>
Depth (F): 175 mm
Distance (C) : 478 mm
Distance (D): 73 mm

Operation tips:
⋅It is recommended to install the heat exchanger vertically
⋅The sides must be connected in countercurrent
⋅Periodic cleaning must be carried out on a heat exchanger

More information:

Plate heat exchanger

770kW heat exchanger
70 plate stainless design

The Ba-60-70 heat exchanger can also work with glycol. In this type of equipment, the heat exchanger serves as a connecting link between the part of the heat pump system flooded with glycol (less often water) and the second part of the system, i.e. the central heating system. Depending on the supply temperature to be provided by the heat pump, this heat exchanger is also suitable for handling units with a power of 15 kW up to 30-32 kW (in the case of equipment operating with glycol). 
The Ba-60-70 heat exchanger can optionally be ordered with insulation / thermal insulation. The insulation of plate heat exchangers is used in heating systems - it is mostly not needed in cooling systems. arise. Since this model has a fairly large external surface, its use is more important than for smaller heat exchangers. According to estimates, a plate heat exchanger without insulation can lose heat energy up to several % of the heat energy (of course, a greater heat loss is only possible during certain stages of the heating of the system).