300-liter SP-H solar hot water system for DHW use, pressure-resistant, internal stainless tank, 30 vacuum tubes, stainless support frame!

300 liter pressure-resistant solar collector

Vacuum tube diameter: 58mm
Length: 1800mm number of pieces 30
Gross collector surface: 3.69 m2
Tank diameter inside 360 ​​mm Outside: 470 mm
Tank material inside: stainless! Exterior: colored steel
Maximum pressure: 6 bar.
Thickness of polyurethane insulation: 55 mm
Material of support structure: stainless!
Collector inclination: 45 degrees

Meters:
Tank width (A): 2510 mm< br />Frame width (B): 2235 mm
Length (D): 1430 mm
Height (C): 1700 mm

Available accessories:
electric heating cartridge
Magnesium anode

Packaging dimensions:
Container: 2600x500x515 55 kg
Vacuum tubes: 2 boxes 1940x340x250 2x38 kg
Frame: 1800x180x110 18 kg

300 liter pressure-resistant solar collector

Solar energy utilization: DHW domestic hot water system. Pressure-resistant collector equipped with a 300-liter tank.
Number of vacuum tubes: 30 pcs
Maximum pressure: 6 bar
It comes with a support frame for a flat surface, which can it can also be installed on a sloping roof.
Once the tank is pressure-resistant, the mains pressure can be applied to it, and it does not have to be installed high up like the cheaper, pressure model without, where the hot water "pressure" is provided by the height of the tank, as far as you know!

FEATURE:

1. The water does not flow directly through the pipes, so it works even if the pipe is broken.
2. Freeze-resistant, can be used all year round
3. Can be connected directly to mains water, circulation pump not required
4. Operating pressure 0.6MPa