Isolated solar system 12V - 230V 1000W 1 kW without battery.

Island solar system

3 400W monocrystalline solar cells, data per piece

Power (Pmax): 400W
Voltage (VMP): 33.0V< /span>
    Max. current (Imp): 9.52A
No load (VOC): 41.0V
    Close current (I sc): 9.99A
    Maximum system voltage: 1000 V / DC
Ambient temperature: -40 ... + 85 ° C
Dimensions: 1754 x 1096 x 30 mm Weight: 22.8 Kg style="color: #000000;">    The solar panels are not packaged! 
Performance guarantee: 10 years 90% and 25 years 80%

1 x 60A solar charge controller

Short circuit protection
Overload protection

Lightning protection
Low voltage protection

Input voltage: 10-100V automatic voltage detection
Charging voltage: between 12 and 24V automatic voltage recognition

Maximum solar power: 60A 2100W
Charging voltage: 13.8Volt / 27.6Volt
Deep discharge protection: 10.7 Volts / 21.4 Volt
    Own consumption: 30mA
    Dimensions 133x188x62mm< /span>
    Weight 400g

Inverter for generating 230V mains voltage

    Short circuit protection
    Overvoltage and overload protection

Overheat protection
Low voltage protection

Controlled fan cooling

    Polarization protection with fuse

Automatic shutdown in case of overload or short circuit

Strong aluminum housing, free of plastic parts

    Input voltage: 12V= (10.4 - 15V)
    Output voltage: 230V~ , 50 Hz
    Pure sine wave alternating current

    Continuous power: 1000 Watts
    Peak power: for a short time 2000W for starting machines

    Shutdown at low voltage: 10.4V

Own consumption in standby: < 0.5W

Own consumption during operation: < 15W

3 pairs of Y connectors for connecting 2 solar panels in parallel
Connector type: MC4

1 cable set for connecting the solar panels and the charge controller

Connector type: MC4
Length: 3 m

1 set of cables for connecting the charge controller and the battery

Connector type: battery connector
Length: 2 m

Isolated solar panel system

The 1000W stand-alone solar panel system charges the battery with the energy obtained from the solar panel and, in the meantime or with the help of the battery, supplies smaller consumers with mains voltage even in the absence of sunshine.

An electrician is not required for installation.

The basis of the system is the high-quality 33V monocrystalline solar cell, the 1000 watt inverter and the 60 amp solar cell charge controller.

The solar cells must be connected in parallel.

With the pre-installed connection cables, you can easily connect the solar panels to the charge controller, inverter and battery. 

You can find the necessary materials for fixing the solar panels to the ground or roof or for extending the cables in our online store, but you can also make them yourself.

Principle of operation: The direct current produced by the solar cells is converted into a regulated 12 volt voltage by the charge controller. The charge controller charges the connected battery. The system does not include the battery!

This stand-alone solar system can charge up to a 200Ah battery in 1 day. It cannot operate properly without a battery.

With a 100Ah battery, you can operate the following appliances for 1 day: average refrigerator (approx. 0.7kWh), energy-saving lighting (approx. 0.3kWh), TV + microwave ( 0.9kWh)
With a 150Ah battery, you can operate the following devices for 1 day: an average refrigerator (approx. 0.7kWh), energy-saving lighting (approx. 0.3kWh), TV + microwave (0.9kWh), small appliances (0.8kWh)

Connect the inverter to the circuit between the charge controller and the battery, which produces a 230 volt mains voltage directly from the solar panel when the sun is shining, and from the battery when the sun is not shining.

The system does not include the battery, recommended power:

Minimum 12V 100Ah, (e.g. 2 50Ah or 1 100Ah batteries) Maximum 12V 400Ah (e.g. 4 100Ah batteries)